Skip to content

Collamat Etiprint Inline 50 Labelling Machine

High-quality printing of currently printed labels and dispensing up to 50m/min – all in one process.

Increase production output and quality

If you need flexible information in the best print quality and increased production output then you found the solution: The Collamat Etiprint Inline.

Best of two technologies

With the Collamat Etiprint Inline 50, you have the best of two technologies in one device. Labeling until 50 m/min and high print quality.

Collamat technology allows you, to use the optimal performance of the printer, without losing production output.

The Inline 50 achieves not only higher performance, than comparable print & apply systems, but it also provides very high labeling accuracy.


Optimal use of printer power, in combination with the Collamat traction unit of C 8600.


Best print quality thanks to slow printing and fast application.


Dispensing speed of currently printed labels up to a maximum of 50m/min.

Speed synchronization

Labeling speed automatically follows the product speed (with an optional encoder)

Energy supply

No expensive compressed air thanks to different flap applicators.

Accurate and reliable

Use of proven Collamat assemblies.

Free choice of printer

Prepared for the installation of various OEM industrial print modules.


ApplicatorsSpring-loaded pinch roller
Flap with magnet
Fixed Applicator
CommunicationEncoder signal
Error signal
Goods scanner
Label end detection
PLC signals (run, warning, error)
Printer signal
Signal lamp (green, orange, red)
USB 2.0
Design SoftwareBartender
Windows Driver
Label reel diameter250mm
Labeling accuracy± 1 mm (1/25 in)
Max. Operational speed50 m/min (164 ft/min)
Max. Passage Width160 mm (6 ¼ in)
Max. Print WidthDepends on OEM printengine
Operation modesMono
Non Stop
Extended peel plate
Label low
Label end detection
Mechanical label scanner for transparent labels
Pressure brushes/rollers/fingers
Side labelling kit
Print TechnologyThermal transfer
Direct thermal
PrinterPrepared for OEM printengines from cab, Sato, Zebra (others on request)
SettingsBy potentiometers
VersionRight or left

Want to know more?

Calo Amato

Vice President

+41 61 756 28 50

Markus Maurer

Technical Manager

+41 61 756 28 27